Hi everybody – hope you are enjoying your Tuesday 🙂
Today I thought I would teach you some of the sections from the
Dreamscapesdesign – WH06 (the curtain)
[singlepic id=856 w=620 h=540 float=center]
About the curtain
The curtain was made with 38mm organza ribbon number 103. There are two drops for this curtain.
1. Cut two lengths of ribbon long enough to make a knot in the curtain — the length can be cut to size afterward.
2. Use a clear anti-fray agent along the raw edges and wait for it to dry.
[singlepic id=857 w=520 h=440 float=center]
3. Drape the ribbons so they overlap one another — see picture above — and use one strand of white thread and tiny stab stitches (working through all the layers) to anchor the ribbon along the top edge. As you stitch, move the ribbon to form small folds for a gathered effect.
4. Knot both lengths of the curtain and use the same thread and stitch to secure the sides onto the fabric. Hint: Stitch only where necessary to support the curtain and to tuck in the folds.
5. Use a tiny stitch or two to secure the knot of the curtain as well.
About the roses
Hint: Make the branches first, then the roses, adding the leaves last.
- The branches form the basic structure (as they do in nature) and they will guide you with the placement of the roses and the leaves in the steps that follow.
- By making the leaves last (after you have made the roses) means that they won’t be in your way as you make the roses.
Make the rose branches
[singlepic id=858 w=520 h=440 float=center]
Click on the image to enlarge
Although the branches may not be visible on the design, rather fill them in: Use a sharp 2B pencil and draw some branches, then stitch over the pencil lines. Make the branches as follows:
1. Thick branches: use thin pieces of green or brown wool and secure with a matching thread. See couching here.
Make the roses
The roses are made in several ways — choose the method which you like best, or use a combination of techniques.
Here are the different shades that were used in this picture. For the:
- cream roses: use 7mm silk ribbon number 77
- white roses: use 7mm silk ribbon number 103 and 104
- beige roses: use 7mm silk ribbon number 110
- pink roses: use 7mm silk ribbon number 48, 135, 122, 47, 102 and 37
- pink and yellow roses: use 7mm silk ribbon number 128
You will find the ribbon page here.
[singlepic id=859 w=620 h=540 float=center]
The roses (above) were made by using the stem stitch rose and the folded ribbon rose stitch. This stitch I have shown in my new Rose book and I have also made a video clip of a folded ribbon rose below:
The roses (below) were made using the same stitch. The smaller roses are made with a French knot — wrap the ribbon twice around your needle.
[singlepic id=861 w=700 h=520 float=center]
Click on the image to enlarge
See how easy it is to make beautiful, realistic roses with silk ribbon?
The secret is to use the hand-painted ribbons with varying shades on one length of ribbon 🙂
Make the leaves
[singlepic id=860 w=520 h=440 float=center]
- Use 7mm silk ribbon or the larger leaves and 4mm silk ribbon for the smaller leaves.
- For the tiny leaves use one or two strands of thread and detached chain stitch.
- The ribbons that were used here are from my range of ribbons and the shades are as follows:
Pale green: numbers 142, 139, 34, 18
Medium green: numbers 33
Dark green: number 142 and 143
Stone colour: number 137
I hope that you enjoyed this small lesson. Have a lovely week ♥